Getting To Know Your Spa9000 - Linksys SPA9000-NA Installation And Configuration Manual

SPA400
for Voice Mail
SPA400
for PSTN Access
Analog
Phone Lines
As illustrated, the complete LVS solution typically includes the SPA9000 IP PBX system, the SPA400
PSTN gateway with voice mail, and several SPA9xx series IP phones . The system has VoIP telephone
service through an Internet Telephony Service Provider (ITSP) but also supports legacy telephone
lines (PSTN lines) through the SPA400 .
The following devices can be connected to an LVS system:
Analog phones, fax machines:
•
the VoIP network through the SPA9000 .
Telephone service through PSTN or ITSP lines, or both:
•
ITSP VoIP Service: The SPA9000 can be configured to subscribe to an Internet Telephone
–
Service Provider for VoIP service . Up to four different ITSP accounts can be configured .
PSTN Analog Phone Access:
–
legacy phone numbers . Typically, one SPA400 is reserved for voice mail service . If your system
has ITSP service, you can add up to two SPA400 devices with a total of 8 PSTN lines . If your
system does not have ITSP service, you can add a third SPA400 device with 4 additional PSTN
lines, for a total of 12 PSTN lines .
IP phones:
The SPA9000 supports up to 16 IP Phones, with firmware version 5 .2 .5 installed on the
•
SPA9000 .
Introducing LVS Equipment
This chapter describes the features of the LVS equipment, including the SPA9000, the SPA400, and the
various models of SPA9xx phones .
"Getting to Know Your SPA9000 " on page 10
•
"Getting to Know Your SPA400 " on page 11
•
"Getting to Know Your SPA9xx Phones and Accessories" on page 12
•
Linksys Voice System Installation and Configuration Guide
LVS Solution Overview
SPA9xx IP Phones
SLM224P Switch
WRV200 Router
Integrated
Access Device
Internet
Up to two analog phones or fax machines can be connected to
The SPA400 can accommodate up to four PSTN lines, to support
Getting Started
Introducing LVS Equipment
SPA9000 IP PBX
Analog Phones
or Fax Machines
9