Linksys SPA9000-NA Installation And Configuration Manual page 109

Q. I want to use a different computer to access the administration web server. I entered http://
SPA9000_ipaddress, but this address did not work.
Investigate the following possible causes:
You may have entered an incorrect address for the SPA9000 .
•
To determine the correct address, complete the following tasks:
a . Connect an analog phone to an available Phone port on the SPA9000 .
b . Press the star (*) key four times: ****
c . Wait until you hear
key or hang up to exit .
d . Press 110# . The IP address of the SPA9000 Internet (external) interface is announced .
If you had the wrong address before, enter the correct IP address in Internet Explorer, and
–
proceed .
If you had the correct address, then refer to the other possible causes below .
–
WAN access may be disabled .
•
To enable access to the administration web server, complete the following tasks:
a . Connect an analog one to an available Phone port on the SPA9000 .
b . Press the star (*) key four times: ****
c . Wait until you hear
key or hang up to exit .
d . Press 7932# .
e . Press 1# to enable WAN access to the administration web server .
f . Press 1 to save the setting .
The SPA900 may be unavailable .
•
a . Try pinging the IP address of the SPA9000 .
b . If you don't get a reply, check the connections .
c . Remove the power cord from the SPA9000, wait a short time, and then reconnect the power
supply to reboot the device .
Q. I configured a SPA932 button to perform call pickup for an extension, but it is not working.
Call pickup can be used only in combination with Busy Lamp Field . Your syntax must include cp+blf .
Review the instructions in "Configuring the SPA932 Sidecar to Work with the SPA9000" on page
Q. I'm trying to access the SPA9000 administration web server, but I do not see the login screen.
Instead, I see a screen saying, "404 Forbidden."
1 . In Internet Explorer, press
new web pages, not cached ones .
2 . From the Tools menu, choose Internet Options . Click the Security tab . Click the Default level
button . Make sure the security level is Medium or lower . Then click the OK button .
Linksys Voice System Installation and Configuration Guide
Linksys configuration menu. Please enter the option followed by the # (pound)
Linksys configuration menu. Please enter the option followed by the # (pound)
CTRL + F5 to perform a hard refresh, which forces the browser to load
75 .
108