d .
In the
Confirm Upgrade window, verify that the correct device information and product
number appear . Then click Upgrade .
A progress message appears while the upgrade is in progress . The success window appears when
the upgrade is completed . The device reboots .
OK to close the confirmation message .
3 .
Click
4 .
To verify the upgrade, start Internet Explorer, and enter the IP address of the SPA9000 . Check the
Router>Status page . The Software Version field should show the firmware version that you
installed .
NOTE:
You may need to refresh your browser to display the updated page reflecting the new
version number .
Linksys Voice System Installation and Configuration Guide
Connecting the LVS Equipment
Installing the SPA9000
34