Telnet Configuration With Authentication Mode Being Password; Configuration Procedure - 3Com 5500-EI PWR Install Manual

[Sysname-ui-vty0] authentication-mode none
# Specify commands of level 2 are available to users logging in to VTY 0.
[Sysname-ui-vty0] user privilege level 2
# Configure Telnet protocol is supported.
[Sysname-ui-vty0] protocol inbound telnet
# Set the maximum number of lines the screen can contain to 30.
[Sysname-ui-vty0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[Sysname-ui-vty0] idle-timeout 6

Telnet Configuration with Authentication Mode Being Password

Configuration Procedure

Follow these steps to configure Telnet with the authentication mode being password:
To do...
Enter system view
Enter one or more VTY
user interface views
Configure to authenticate
users logging in to VTY
user interfaces using the
local password
Set the local password
Configure the command
level available to users
logging in to the user
interface
Configure the protocol to
be supported by the user
interface
Set the commands to be
executed automatically
after a user login to the
user interface successfully
Make terminal services
available
Use the command...
system-view
user-interface vty
first-number [ last-number ]
authentication-mode
password
set authentication
password { cipher | simple }
password
user privilege level level
protocol inbound { all | ssh |
telnet }
auto-execute command text
shell
3-5
Remarks
—
—
Required
Required
Optional
By default, commands of level 0 are
available to users logging in to VTY
user interface.
Optional
By default, both Telnet protocol and
SSH protocol are supported.
Optional
By default, no command is executed
automatically after a user logs into the
user interface.
Optional
By default, terminal services are
available in all user interfaces.