Overview Of Hp Netraid Utilities - HP P3410A - NetRAID 1M RAID Controller User Manual

1 Overview of HP NetRAID Utilities

Three HP NetRAID utilities can configure and manage HP NetRAID Series
subsystems. Integrated HP NetRAID controllers and HP NetRAID Series adapters
(HP NetRAID-1Si and HP NetRAID-3Si) use the same utilities. However, all
utilities are not available to all network operating systems.
HP NetRAID Assistant is used only with Microsoft Windows NT and
Windows 2000. (This utility is similar to the one that you ran from the
HP NetServer Navigator CD-ROM to initially configure your
HP NetRAID subsystem.)
HP NetRAID Config is a text-based RAID configuration utility that runs
under Novell NetWare, IBM OS/2, SCO OpenServer, and SCO UnixWare.
HP NetRAID Express Tools is a text-based RAID configuration utility
available to all operating systems. HP NetRAID Express Tools has some
advanced features not available in the other utilities.
Table 1-1. HP NetRAID Management Utilities and Network Operating Systems
Network Operating
System
Microsoft Windows 2000
Microsoft Windows NT
Novell NetWare
IBM OS/2
SCO OpenServer
SCO UnixWare
NOTE
HP NetRAID
Assistant
X
X
Consult the Hewlett-Packard World Wide Web site
(http://www.hp.com/go/netserver) or your local HP dealer for
compatibility of your adapter with the most current versions of
the network operating systems listed in the preceding table.
HP NetRAID HP NetRAID
Config Express Tools
X
X
X
X
X
X
X
X
X
X
3