Hp Netraid Assistant; Overview; A Hp Netraid Assistant Main Window - HP P3410A - NetRAID 1M RAID Controller User Manual

Hp netraid series user guide
Hide thumbs Also See for P3410A - NetRAID 1M RAID Controller:
Table of Contents

Advertisement

2 HP NetRAID Assistant

Overview

HP NetRAID Assistant is an object-oriented, graphical user interface (GUI)
management utility that runs under Microsoft Windows NT or Windows 2000.
HP NetRAID Assistant allows you to control and monitor the status of hard disk
drives on the local HP NetServer or over a network with several servers.
This section provides the following information:
A. HP NetRAID Assistant Main Window
B. HP NetRAID Assistant Menu Options
C. Using the Wizard to Configure Arrays and Logical Drives
D. Managing RAID with HP NetRAID Assistant
E. Managing Servers Over the Network
F. Windows NT Monitor Service for HP NetRAID (also for Windows 2000)

A HP NetRAID Assistant Main Window

Start HP NetRAID Assistant.
To start HP NetRAID Assistant under Windows 95 or 98, click the
NetRAID Assistant icon in the NetRAID program group (or group you
specified).
To start HP NetRAID Assistant under Windows NT or Windows 2000,
click the Start button, point to Programs, point to NetRAID in the
Programs menu, and click NetRAID Assistant.
Figure 2-1 shows an example of the main window of HP NetRAID Assistant.
NOTE
Since HP NetRAID-1Si is a single-channel adapter, the
HP NetRAID Assistant Main window for HP NetRAID-1Si
contains only Channel 0 information. In HP NetServer LH 3/3r
and LH 4/4r, the integrated HP NetRAID controller can show
either one or two channels depending upon how many channels
you enabled for HP NetRAID. Integrated HP NetRAID
controllers in other HP NetServers show two channels.
15

Advertisement

Table of Contents
loading

Table of Contents