HP P3410A - NetRAID 1M RAID Controller User Manual page 54

Chapter 2
The options are defined as follows:
Perform consistency check.
-cons
Scheduled intervals. Valid options are:
-w#
-w0 = daily
-w1 = every week
-w2 = biweekly
-w4 = every month
-w12 = every three months
-w24 = every six months
Day of the week. Valid options are -d1( Sunday) through
-d#
-d7 (Saturday)
Hour in 24-hour format. Valid options are -d0 (12:00
-h#
a.m.) through -d23 (11:00 p.m.)
Start date in mm/dd/yyyy format. The consistency check
-date
starts from this date on. Valid years are 1900 through
2038.
-enChkCon Do consistency check at the next scheduled time. This is
the default.
-disChkCon Do not do the consistency check at the next scheduled
time.
Examples:
megactrl -cons -w2 -d0 -h1 -date05/01/1998
The consistency check starts after 05/01/1998 and happens every other
Sunday at 1:00 a.m.
megactrl -cons -w4 -d6 -h0 -date04/01/2001
The consistency check starts after 04/01/2001 and happens on Saturday
every month at midnight.
megactrl -cons -w0 -d3 -h1
The consistency check happens every day at 1:00 a.m.
To stop a consistency check in progress, and to prevent future scheduled
consistency checks, type:
megactrl -cons -abort
48
HP NetRAID Assistant