Introduction - HP P3410A - NetRAID 1M RAID Controller User Manual

Introduction

The HP NetRAID-1Si and HP NetRAID-3Si adapters and the integrated
HP NetRAID controllers built into certain HP NetServers let you link multiple
hard disk drives together to write data across them as if they were one large drive
You configure your linked drives in a RAID (redundant array of independent
disks) subsystem.
Initial installation and configuration of HP NetRAID Series adapters is described
in the HP NetRAID Series Installation and Configuration Guide. Initial
configuration of the integrated HP NetRAID controller is described in the HP
NetServer Integrated NetRAID Controller Configuration Guide.
This HP NetRAID Series User Guide contains information on the HP NetRAID
utilities that let you manage and make changes to an existing RAID system. This
guide covers the following topics:
Overview of HP NetRAID Utilities
HP NetRAID Assistant (for Windows NT and Windows 2000)
HP NetRAID Config (for Novell NetWare, IBM OS/2, and SCO
OpenServer and UnixWare)
HP NetRAID Express Tools (use with all supported network operating
systems)
Reconstructing and Rebuilding Drives
Capacity Expansion
Monitor Alert List
Alarm Control and Audible Warnings
Glossary
1