10 Understanding HP NetRAID Utilities
After you have installed the adapter and configured your system, four utilities
help you manage HP NetRAID-1M and 2M adapters. Two of these utilities only
work with specific network operating systems. The utilities are:
HP NetRAID Assistant (used with Microsoft Windows NT or Windows
2000 or from the HP Netserver Navigator CD-ROM)
HP NetRAID Config (used with Novell NetWare, SCO OpenServer, and
SCO UnixWare)
HP NetRAID Express Tools (used with all network operating systems)
HP NetRAID Monitor utilities (available with each network operating
system)
HP NetRAID Assistant
All users configure their systems for the first time using HP NetRAID Assistant.
This utility has an object-oriented GUI.
You can start this utility in two ways:
If your NOS is Microsoft Windows NT or Windows 2000, click the
HP NetRAID icon in the Windows Program Manager.
If your NOS is Novell NetWare, SCO OpenServer, or SCO UnixWare,
you can start HP NetRAID Assistant from the HP Netserver Navigator
CD-ROM as you did during initial installation. To use HP NetRAID
Assistant from the HP Netserver Navigator CD-ROM, you must reboot
your HP Netserver.
123