7 Monitor Alert List
This chapter lists monitor messages for the supported network operating systems
that provide information about the monitor utility, adapters (HP NetRAID
adapters and integrated HP NetRAID controllers), physical drives, and logical
drives.
For BIOS error messages and other troubleshooting, refer to the
"Troubleshooting" chapter in the HP NetRAID Series Installation and
Configuration Guide or the HP NetServer Integrated NetRAID Controller
Configuration Guide.
Microsoft Windows NT and Windows 2000
NOTE
Novell NetWare Monitor Messages
Table 7-1. NetWare Monitor Messages
Condition
Physical drive state
change
Logical drive state
change
Physical drive
rebuilding at startup of
monitor
Logical drive state at
startup
The number of
adapters found by
monitor
For Windows NT and Windows 2000, the monitor capability is
integrated into the HP NetRAID Assistant utility.
HP NetRAID-Adapter # (Channel: SCSI ID#) state
(previous state) to (new state)
HP NetRAID-Adapter # LD-# state (previous state) to (new
state)
Warning: HP NetRAID-Adapter # Channel: SCSI ID# at
startup is in REBUILD state
HP NetRAID-# LD-# state at startup is X
HP NetRAID Mon: # HP NetRAID Adapters Found
Messages
137