Hp Netraid Express Tools - HP P3410A - NetRAID 1M RAID Controller User Manual

Chapter 1

HP NetRAID Express Tools

HP NetRAID Express Tools is available to all network operating systems because
this utility is contained in the firmware. HP NetRAID Express Tools contains
some advanced management and diagnostic utilities that are not available with
HP NetRAID Assistant or HP NetRAID Config.
NOTE
To access HP NetRAID Express Tools you must restart the
HP NetServer.
To start HP NetRAID Express Tools:
1. Log off all users, close all applications, and power down the HP NetServer.
2. Restart the HP NetServer.
3. When the following prompt appears, press <Ctrl> <M>.
Option: Experienced users may press <Ctrl> <M> for
HP NetRAID Express Tools now.
Firmware Initializing
For complete information on this utility, see Chapter 4, "HP NetRAID Express
Tools," in this guide.
8
Overview of HP NetRAID Utilities