Table of Contents
Advertisement
Overview
The HP NC7771 PCI-X Gigabit Server Adapter is a high-performance, single port, Ethernet
adapter that delivers up to 1000 Mb/s Ethernet over twisted-pair (copper) cabling. The
NC7771 adapter has a fully integrated controller capable of auto-negotiating a link at 10, 100,
or 1000 Mb/s. The network connection is made through an RJ-45 connector. LED indicators
show the speed and activity of the link once it has been established. The NC7771 PCI-X
Gigabit Server Adapter is a supported option for selected HP ProLiant servers. For best
performance, install the adapter in a 64-bit/133 MHz, PCI-X slot.
For the latest functionality, features, and operating system support for this server adapter,
refer to the networking page at
www.hp.com/servers/networking
Hardware Overview
The NC7771 Gigabit Server Adapter has one auto-negotiating 10/100/1000 RJ-45 port. LED
indicators show link, activity, and port speed. Refer to Table 1-1 for descriptions of LED
operations.
HP NC7771 PCI-X Gigabit Server Adapter User Guide
HP CONFIDENTIAL Codename: Banshee II Part Number: 252458-00C Last Saved On: 7/28/03 12:26 PM
1
Introduction
1-1
Advertisement
Table of Contents
