4 HP NetRAID Express Tools
Overview
HP NetRAID Express Tools resides in the HP NetRAID BIOS, and is therefore
available to all supported operating systems. This utility duplicates many of the
management functions found in HP NetRAID Assistant and HP NetRAID Config.
Because you must restart the HP NetServer to start HP NetRAID Express Tools, it
is recommended that you use HP NetRAID Assistant or HP NetRAID Config
whenever possible.
However, HP NetRAID Express Tools contains several options that are not
available with HP NetRAID Assistant or HP NetRAID Config. Use HP NetRAID
Express Tools to view or change the following parameters:
Adapter Type (also available with HP NetRAID Config)
Autorebuild
Battery Functions Status (also available with HP NetRAID Config)
BIOS Enable/Disable
Cache Flush Timings
Diagnostics
On-board memory test
NVRAM test
Parity check
DMA test
Timer test
Interrupt test
Hardware register test
Disk Spin-Up Timings (also available with HP NetRAID Config)
Emulation
Initiator ID
75