Exit Hp Netraid Assistant; F Windows Nt Monitor Service For Hp Netraid - HP P3410A - NetRAID 1M RAID Controller User Manual

Chapter 2

Exit HP NetRAID Assistant

Exit HP NetRAID Assistant by choosing Exit from the Configuration menu, or by
clicking the Exit button in the toolbar, or by double-clicking the upper-left corner
of the main window.

F Windows NT Monitor Service for HP NetRAID

NOTE
HP NetRAID NT monitor service for HP NetRAID supports
Windows NT and Windows 2000.
The HP NetRAID NT monitor service tracks the status changes of HP NetRAID
Series adapters, integrated HP NetRAID controllers, and all of their logical drives
and physical drives. It also performs consistency checks for all optimal, redundant
logical drives at scheduled intervals. (Redundant logical drives include all drives
of RAID levels 1, 3, 5, 10, 30, and 50.) All status changes are logged in the
Windows NT Event Viewer Application Log.
The two ways of controlling the HP NetRAID NT monitor service are:
Through the Control Panel Service
Through a DOS utility
To display the DOS utility options, type
megactrl ?
To start, stop, pause, resume, or delete the HP NetRAID NT monitor service
use one of the following commands:
megactrl -start
megactrl -stop
megactrl -pause
megactrl -resume
megactrl -del
The default consistency check happens every Sunday at midnight starting from
the date of installation.
To specify a different consistency check schedule, type the following at the
DOS shell of Windows NT or Windows 2000:
megactrl -cons -w# -d# -h# -datemm/dd/yyyy
HP NetRAID Assistant
47