Option Configuration - Konica Minolta bizhub 36 User Manual

2.1

Option configuration

2 Part names and their functions
2.1 Option configuration
No. Name
1 Main unit
2 Authentication Unit AU-201
3
Working Table WT-510
4 Desk DK-511
5 Paper Feed Cabinet PC-211
6 Mount Kit MK-601
7
Finisher FS-529
The following options are built inside this machine and are not shown in the figure above.
8
Fax Kit FK-509
bizhub 42/36
7
6
5
1
4
Description
The original is scanned by the scanner section, and the
scanned image is printed by the printer section.
The main unit is hereinafter referred to as "the ma-
chine", "this machine", "main unit", or bizhub 42/36
through the manual.
Performs user authentication by scanning information
recorded on the IC card.
The Working Table WT-510 is required to install the
Authentication Unit AU-201.
This unit is hereinafter referred to as the Authentica-
tion Unit through the manual.
Provides an area to temporarily place an original or
other materials. This is also used when the authentica-
tion unit is installed.
By using the Desk, you can install this machine on the
floor.
This unit is hereinafter referred to as the Desk through
the manual.
Allows you to load up to 500 sheets respectively in the
top and bottom trays.
This unit is hereinafter referred to as the Double Paper
Feed Cabinet through the manual.
Required when installing the Finisher FS-529.
Install this unit onto the output tray of the main unit to
sort, group or staple printed paper before feeding out.
Allows this machine to function as a fax machine.
• This option may not be available depending on the
sales area.
2
3
2-2
2