Checking The Option Configuration; List Of Optional Components - Konica Minolta bizhub C3350 User Manual

3.2

Checking the option configuration

3.2 Checking the option configuration

List of optional components

No. Name
1 Authentication Unit
AU-201/AU-201S
2 Working Table WT-
P02
3 Finisher FS-P03
4 Keypad KP-101
5 Paper Feed Unit PF-
P13
6 DESK DK-P03
The following optional components are built into this machine and are not shown in the figure above.
7 Fax Kit FK-512
8 Mount Kit MK-738
9 Mount Kit MK-P02
[Introduction]
6
Description
Performs user authentication by scanning information recorded on
the IC card or the NFC-compatible mobile terminal (Android terminal).
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit or Finisher FS-P03
is installed.
Staples the printed sheets.
For staples, use Staple Kit SK-501.
Located on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
Allows you to load up to 500 sheets.
There are two slots in which the Paper Feed Unit can be installed.
Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
Used to operate this machine as a fax machine.
This is provided as standard on the bizhub C3850FS and bizhub
C3850 models sold in North America.
This unit is required to install the Fax Kit.
This is provided as standard on the bizhub C3850FS and bizhub
C3850 models sold in North America.
Required to have Authentication Unit built in to the main unit.
1
5
3
2
3
4
3-6