Zoom] - Konica Minolta bizhub 36 User Manual

5.3

[Zoom]

5.3 [Zoom]
Image size in the original can be enlarged or reduced.
0 The auto zoom setting and the auto paper setting cannot both be selected at the same time.
%
Press [Copy] or the Copy key ö [Zoom].
Settings
[-] / [+]
[Set Zoom]
[Auto]
[Full Size]
[Manual]
[Minimal]
bizhub 42/36
Configure the zoom ratio (25.0% - 400.0%) of the copy.
With documents loaded into the ADF, the zoom ratio can be set between
25% and 200%.
Select or change the registered zoom ratio (25.0 - 200.0%).
[Minimal] allows you to change the zoom ratio.
The most appropriate zoom ratio is automatically selected based on the
size of the loaded original and the specified paper size.
A copy that is the same size as the original (100%) is produced.
Enter the zoom ratio (25.0% - 400.0%) of the copy.
Copies an original image slightly smaller than the original size or the spec-
ified size. The image in the original is centered on the paper without any
cutoff.
Select this setting when you want to copy the entire scope of the original
within the paper used.
5
5-6