Page 1
INSTALLATION MANUAL Applied Machines: <Important> Be sure to correctly follow the procedures in order as explained in this Installation Manual. If you do not follow the procedure in order, the image trouble may occur. 1. Outline of installation procedures HT-509 MK-734 PC-113 PC-213...
2. Installation space (unit: mm (inch)) 4. Notes on using touch panel bizhub 367 + DF-628 + PC-213 + FS-534 Be sure to instruct users on the following points. • Pressing the touch panel hard may cause dam- 1545 (60-13/16) age.
6. Installing the main body and the Paper 7. Removing protective tape, packing and Feed Cabinet (or the Desk) other shipping materials (1) Take the main body and the Paper Feed Cabinet (1) Remove the protective tape and the protective (or the Desk) out from its packaging.
Page 4
(2) Remove the locking materials. (3) Affix the supplied blind label. Note: Keep the locking materials. It is necessary for transporting the machine. a) Open the right door and remove the locking materials. Note: After removing the locking materials, make sure that the transfer roller assy is secured in place.
8. Installing the toner cartridge (8) Open the front door. Note: Since a toner cartridge is not supplied with the machine, purchase one separately. (1) Shake the toner cartridge up and down and left to right 5 to 10 times respectively. Note: Shake the cartridge adequately.
(3) Push the toner cartridge all the way in and rotate (2) Attach the supplied connector cover to the it clockwise to lock it. machine. (One supplied screw) Note: Make sure that the toner cartridge is pushed all the way in. (3) Attach the supplied connector cap to the connec- tor at the back of the main body.
11. Connecting the power cord 12. Starting the machine (1) Connect the power cord. Turn ON the power switch on the right side of the main body. Note: This may not be performed depending on the applicable marketing area. 13. Date & Time Setting/Time Zone Setting (Service Mode) (1) Display the Service Mode screen.
16. Performing Non-Image Area Erase 17. Configuring other options Check (1) If any of the following options are installed, refer to the installation manual for each option and Note: configure the option(s). Perform the below at the site where customer •...
Page 9
19. Network setting 22. Affixing the paper size label Make the TCP/IP address setting for the network. Affix the paper size labels that correspond to the sizes of paper used in each tray. Note: Consult the network administrator for the setting value to be entered and make settings as required.
Page 10
25. Affixing the panel sheet Affix the supplied panel sheet to the surface of the operation panel. Note: • The panel sheet is affixed on customer request. • Affix the NFC panel sheet if necessary. • The panel sheet must be kept by the customer. E-10...
OC-514 Original Cover INSTALLATION MANUAL 1 Accessory parts 2. Installation procedures (1) Remove the two knockouts using nippers or a Name Shape Q’ty similar tool. 1. Original cover 2. Original mat 3. Hinge cover (right) 4. Hinge cover (2) Attach the supplied hinge cover (right) and hinge (left) cover (left).
Page 12
(4) Using a cleaning pad dampened with alcohol, (8) Open the original cover and press on the original wipe the undersurface of the original cover, mat firmly so that it does not peel off. where the original mat is attached. イラスト作成中...