Glossary - Konica Minolta bizhub 36 User Manual

11.1

Glossary

11 Appendix
11.1 Glossary
The following describes the terms used in Copy mode.
Term
[Background Removal]
[Binding Position]
[Change Tray Settings]
[Contrast]
[Density]
[Duplex/Combine]
[Finishing]
[Group] (Copy or Finishing)
[ID Copy]
[Manual]
[Minimal]
[Offset]
[Original Direction]
[Original Type]
[Paper]
[Proof Copy]
[Separate Scan]
[Sharpness]
[Sort] (Copy or Finishing)
[Staple]
bizhub 42/36
Description
Function that adjusts the background density of the original with a
colored background. Select a background removal method and lev-
el to copy the original.
Specify the original binding position (page margin) to prevent the
copy from being printed upside-down when scanning a 2-sided
original.
Function that copies the original with a paper size not specified in
the paper tray or copies it on paper other than plain paper.
Function that adjusts the contrast between light and dark.
Function that adjusts the density of the print image in nine levels.
Function to specify the scanning side of the original and the printing
side of the paper to be 1-sided or 2-sided.
Allows you to select how to sort or finish copies when feeding them
into the output tray.
Function that prints copies in pages. This function first prints the
specified number of copies of the first page, and then prints the sec-
ond page in the same way.
Separately scans the contents of the front and back sides of a card,
for example, insurance card, driver's license, or business card, and
copies them together on one sheet. You can copy a card with the full
size or enlarge an image to fit paper. Using the card copy function,
you can save the number of sheets to be used.
Function that enlarges or reduces the loaded original with the zoom
ratio specified using the keypad, and copies it on paper.
This setting slightly reduces the image of the original and copies it at
the center of the paper.
Function that sorts copies.
Function that specifies the orientation of the original loaded into the
ADF or placed on the Original Glass.
Function that allows you to select the desired functions according to
the original text or image type and adjust it to obtain better image
quality.
Allows you to configure the type and the size of the paper to be print-
ed on.
Function that prints a sample copy and stops printing temporarily
before printing a large number of copies. This prevents copy errors
from occurring in a large number of copies.
Function that divides the original into multiple parts for scanning
when the number of original pages exceeds the maximum (50 pag-
es) that can be loaded into the ADF. You can scan the original and
batch-copies it as one copy job. You can also load the original on
the Original Glass or switch to the ADF during scanning.
Function that emphasizes the edges of text so that it can be read
more easily. This function also enables you to adjust the original im-
age.
Function that prints a document in sets of copies. The second copy
set is printed after all of the first copy set is finished.
Function that staples copies.
11
11-2