Konica Minolta bizhub 36 User Manual page 29

No. Name
7
Reset
8 Interrupt
9
Stop
10
Start
11
Keypad
12 C (Clear)
13
Error Indicator
14
Data Indicator
15 Utility/Counter
16
Mode Memory
17 Access
bizhub 42/36
Description
Press this key to reset settings (except programmed
settings) entered using the Control Panel and
Touch Panel.
Press this key to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the Inter-
rupt key lights up in green. To cancel Interrupt
mode, press the Interrupt key again.
Pressing this key while copying, scanning or printing
temporarily stops the operation.
Press to start the copy, scan or fax operation.
Allows you to specify the number of copies. Allows
you to enter the magnification. Allows you to enter
various settings.
Clears a value (such as the number of copies, a
zoom ratio and size) entered using the Keypad.
Flashes in orange if an error occurred.
Lights up in orange when the service representative
is being called.
Flashes in blue while a print job is being received.
Lights up in blue when a print job is queued to be
printed or while it is being printed.
Press to display the [Utility Settings] screen. From
the [Utility Settings] screen, settings can be speci-
fied for the parameters in the [Accessibility], [Meter
Count], [Address Registration], [User Settings], and
[Admin Settings] screens.
Allows you to register (store) the desired
copy/fax/scan settings as a program or to recall a
registered program.
If user authentication or account track settings have
been applied, press the Access key after entering
the user name and password (for user authentica-
tion) or the account name and password (for ac-
count track) in order to use this machine.
While logged on, press the Access key to log off,
and go back to the authentication screen.
4
Page
p. 4-4
p. 4-14
p. 4-4
p. 4-4
−
p. 4-4
−
−
p. 4-8
p. 4-11
p. 4-12
4-3