Using Ieee802.1X Authentication; Tcp/Ip Settings]; Device Certificate Setting]; Ieee802.1X Authentication Setting] - Konica Minolta bizhub 223 User Manual

8.10

Using IEEE802.1X authentication

8.10 Using IEEE802.1X authentication
If you use this machine in a wired LAN environment having the IEEE802.1x authentication system, you must
configure the supplicant (authentication client) function of this machine.
Using IEEE802.1x authentication can restrict any device not permitted by the administrator to connect to this
LAN environment. Configure settings to fit your environment.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
8.10.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
8.10.2

[Device Certificate Setting]

Register the client certificate (device certificate) on this machine, based on the EAP authentication method
to be used.
- If [EAP-Type] is [EAP-TLS], you must register the device certificate.
- If [EAP-Type] is [EAP-TTLS] or [PEAP], you may be required to register the device certificate according
to your applications.
For details on device certificate registration, refer to page 8-2.
bizhub 423/363/283/223
[TCP/IP Settings]
[Device Certificate Setting]
[IEEE802.1x Authentication
Setting]

Certificate validation

[IEEE802.1X Authentication
Trial]
Finish
8
8-29