/
INSTALLATION MANUAL
Applied Machines:
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
PC-109
PC-208
PC-409
AU-102
WT-506
Machine
AU-201
KH-101
SP-501
*2
DF-621
Electronic system options
JS-603
PK-517
FS-527
FS-529
SD-509
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main body instal-
lation.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.
• To use this machine, install the reverse auto-
matic document feeder (ADF) or the original
cover.Even if you do not install the original
cover, be sure to install the hinge covers sup-
plied with the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
/
/
/
/
DK-508
✱ Electronic system options
*1
*1
EK-604
EK-605
*1
UK-203
*1
SC-507
OC-509
*2
HD-516
FK-508
MK-726
*1
: No particular order in installation
procedures.
JS-505
*2
: Whether the device is standard or
optional depends on each model
and marketing area.
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded. Machine mass:
• Approx. 78 kg (171-15/16 lb)
(423/ADF-standard 363 machines)
• Approx. 66 kg (145-1/2 lb)
(363 machines without ADF/283/223)
A1UDIXC001DA
A1UD-9622-02
II. Installation space (unit: mm (inch))
bizhub 423 + PC-208 + FS-527 + SD-509
658
/
(25-7/8)
293
(11-9/16)
III. Pre-installation check items
1. Select a level and stable place for installing the
machine.
2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.
3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.
5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.
6. Avoid a dusty location, or a place near volatile
and flammable substances.
7. Avoid a poorly ventilated place.
E-1
IV. Accessory parts
No.
1634
1. User's guide holder
(64-5/16)
2. Quick guide
976
(Copy/Fax/Scan/Box operations)
(38-7/16)
3. Installation manual
4. User's guide CD
5. CD-ROM
6. Paper size label
7. Label (Legal restrictions on copying)
8. Chart
*2
9. Seal A (Round)
10. Seal B (Square)
11. Cap A (Black)
12. Cap B (White)
1187
13. Power cord
(46-3/4)
14. Power cord instruction
834
(32-13/16)
15. Control panel
16. Screw (3
17. Spacer
*1
18. Panel pen
19. Developer
20. Mylar
*1
Varies depending on the applicable marketing
area.
*2
Supplied only when the ADF is standard.
A1UDIXC002DA
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
Name
Q'ty
1
1
1 set
1
1 set
1
*1
1
1
2
2
2
2
*1
1
*1
1
1
×
8 mm)
1
1
1
1
2