Scan To Authorized Folder Settings]; Tcp/Ip Settings]; User Authentication; Client Setting] - Konica Minolta bizhub 223 User Manual

8.5 Restricting the use of the SMB address registered in the address book
8.5.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
- To specify the destination computer with the computer name (host name) for SMB transmission in IPv6
environment, prepare a DNS server and configure DNS settings in this machine.
For details, refer to page 2-2.
8.5.2

User Authentication

Configure settings to restrict users who use this machine.
For details, refer to the following reference pages.
- "Restricting users of this machine (MFP authentication)" (p. 7-2)
- "Restricting users of this machine (Active Directory)" (p. 7-10)
- "Restricting users of this machine (Windows domain or workgroup)" (p. 7-15)
- "Restricting users of this machine (NDS over TCP/IP)" (p. 7-22)
- "Restricting users of this machine (LDAP)" (p. 7-25)
8.5.3

[Scan to Authorized Folder Settings]

Configure settings to restrict the specification of addresses that users directly enter.
For details, refer to page 8-42.
8.5.4

[Client Setting]

Configure SMB client settings.
For details, refer to page 4-3.
8.5.5

[WINS Setting]

To perform SMB transmission via routers, configure the WINS server settings.
For details, refer to page 4-4.
8.5.6

[Direct Hosting Setting]

To perform SMB transmission in an IPv6 environment, enable the Direct Hosting service.
For details, refer to page 4-5.
8.5.7

[LLMNR Setting]

To perform name resolution in the environment configured to communicate with Windows Vista/Server
2008/7, and where the DNS server is not running, enable the LLMNR function.
For details, refer to page 4-5.
bizhub 423/363/283/223
8
8-19