Configuring Settings To Send Or Receive Faxes; [Tx/Rx Settings] - Konica Minolta bizhub 223 User Manual

14.4

Configuring settings to send or receive faxes

14.4 Configuring settings to send or receive faxes
Configure settings related to transmission and reception of faxes including file handling at the time of a polling
transmission and printing method at the time of reception of a fax.

[TX/RX Settings]

In the administrator mode of PageScope Web Connection, select [Fax Settings] ö [TX/RX Settings].
Item
[Duplex Print (RX)]
[Letter/Ledger over
A4/A3]
[Print Paper Selection]
[Print Paper Size]
[Incorrect User Box No.
Entry]
[RX from Rejected Fax
No.]
[Tray Selection for RX
Print]
[Min. Reduction for RX
Print]
[Print Separate Fax
Pages]
[File After Polling TX]
[No. of Sets (RX)]
bizhub 423/363/283/223
Description
Select whether to print a received fax on both side of sheets.
This item is not available when [Print Separate Fax Pages] is set to [ON].
Specify whether to use paper in inch-sized paper first when printing received
faxes.
This item is not displayed for Taiwan models.
Select the priority order of paper trays used to print received faxes.
If you select [Priority Size], received faxes are printed on paper of the priori-
tized size. If the prioritized size is not specified, received faxes are printed on
paper of the nearest size.
If you select [Fixed Size], received faxes are printed on paper of only the spec-
ified size.
If [Tray Selection for RX Print] is set to other than [Auto], this item will be set to
[Auto Select].
Select the size of paper used to print received faxes.
Select an action to be taken when the unregistered User Box number is spec-
ified when a fax is received by using User Boxes.
This function can be specified only when a Hard Disk is installed.
This item is not available.
If you want to fix the paper tray used to print received faxes, select the paper
tray to be fixed.
If [Print Paper Selection] is set to other than [Auto Select], this item will be set
to [Auto].
Specify a reduction ratio of received faxes.
When a received fax does not fit within the standard paper size, this setting is
used to adjust the size.
Select whether to divide a received fax into two or more pages when the doc-
ument is larger than the standard paper size.
This item is not available when [Duplex Print (RX)] is set to [ON].
Specify whether to delete a file after completing polling transmission of the file.
If you need two or more sets of a received fax, specify the number of sets.
14
14-6