[Tsi User Box Settings] - Konica Minolta bizhub 223 User Manual

14.5 Configuring settings for the fax functions

[TSI User Box Settings]

In the administrator mode of PageScope Web Connection, select [Fax Settings] ö [Function Setting] ö
[TSI User Box Settings].
Reference
- The TSI distribution function automatically distributes the document received with the sender fax
number (TSI) to the forwarding destination specified for each sender.
- This function cannot be configured together with [PC-Fax RX Setting], [Forward TX Setting], or [Memory
RX Setting].
- The TSI User Box Setting can be configured for each line when receiving faxes for each line (two op-
tional Fax Kit FK-508 are installed while [Individual Receiving Line Setup] is set to [ON] in [TX/RX Set-
tings]).
Item
[TSI User Box Setting]
[Action when TSI User
Box is not set.]
[Print]
bizhub 423/363/283/223
Description
Select whether to enable the TSI distribution.
This function distributes received faxes to each phone number based on the
TSI (telephone numbers information) of the fax transmitter.
Select an action to be taken when receiving unregistered TSI information.
If you select [Automatically & Print], the received document is printed.
If you select [Memory RX User Box ], the received document is saved in the
Memory RX User Box.
If you select [Specified Box] and specify a User Box in [Select from User Box
No.], the received document is saved in the specified user box. For the desti-
nation User Box, a Public, Personal, or Group User Box can be specified.
[Specified User Box] is displayed only when a Hard Disk is installed.
Specify whether to print received faxes after completing the reception.
14
14-14