Using Ieee802.1X Authentication; Tcp/Ip Settings; Device Certificate Setting - Konica Minolta bizhub C652 User Manual

2
2.52

Using IEEE802.1X authentication

If you use this machine in a wired LAN environment having the IEEE802.1x authentication system, you must
configure the supplicant (authentication client) function of this machine.
Using IEEE802.1x authentication can restrict any device not permitted by the administrator to connect to this
LAN environment. Configure settings to fit your environment.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
2.52.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-8.
2.52.2

Device Certificate Setting

Register the client certificate (device certificate) on this machine, based on the EAP authentication method
to be used.
- If EAP-Type is "EAP-TLS", you must register the device certificate.
- If EAP-Type is "EAP-TTLS" or "PEAP", you may be required to register the device certificate according
to your applications.
For details on device certificate registration, refer to page 2-18.
2-180
Using IEEE802.1X authentication
TCP/IP Settings
Device Certificate Setting
IEEE802.1X Authentication
Setting
Certificate validation
IEEE802.1X Authentication
Trial
Finish
bizhub C652/C652DS/C552/C452 (Version 3)
2.52