Configuring Initial Settings For The Printer Function; [Basic Setting] - Konica Minolta bizhub 223 User Manual

13.1

Configuring initial settings for the printer function

13 Configuring Settings for Printer Function
13.1 Configuring initial settings for the printer function
Configure the initial settings for the printer function.

[Basic Setting]

In the administrator mode of PageScope Web Connection, select [Print Setting] ö [Basic Setting].
Item
[PDL Setting]
[Paper Tray]
[Output Tray]
[2-Sided Print]
[Bind Direction]
[Staple]
[Punch]
[Number of Sets]
[Default Paper Size]
[Original Direction]
[Spool Print Jobs in
HDD before RIP]
bizhub 423/363/283/223
Description
Select the printer definition language.
Select the primary paper tray.
Select the primary output tray.
Select whether to print in the 2-sided print format.
Select the binding position for 2-sided printing.
Select whether to staple printed sheets. To staple printed sheet, select the
number of staples.
The staple function is available only when the optional finisher is installed.
Select whether to punch printed sheets. To punch printed sheets, select the
number of punched holes.
The punch function is available only when the optional finisher and punch kit
are installed.
Enter the number of copies to be printed.
Select the paper size.
Select the orientation of an image to be printed.
Select whether to spool print jobs to HDD.
This function can be specified only when a Hard Disk is installed.
13
13-2