HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 61

To change account parameters:
When changing account parameters, if you change the ADlist for the user account, all of the currently
active sessions for that account will be logged out.
1. Connect to the switch and log in using an admin account.
2. Enter the following command:
userconfig --change username [-r rolename] [-h admindomain_ID]
[-a admindomain_ID_list] [-d description] [-e yes | no] -u -x
username
-r rolename
-h admindomain_ID
-a
admindomain_ID_lis
t
-d description
-e
-u
-x
To add an Administrative Domain to the account:
1. Connect to the switch and log in using an admin account.
2. Enter the following command:
userConfig --addad <username> [-h <admindomain_ID>] [-a <admindomain_ID_list>]
where <username> is the account to which the Administrative Domain is being added (the account
must already exist) <admindomain_ID> is the home Administrative Domain and
<admindomain_ID_list> adds the new list Administrative Domain to the existing list.
3. Log into the switch again to verify access to the newly-added Admin Domain.
To remove an Administrative Domain from the account:
When removing an Admin Domain from an account, all of the currently active sessions for that account will
be logged out.
1. Connect to the switch and log in using an admin account.
2. Enter the following command:
userConfig --deletead <username>
where <username> is the account from which the Admin Domain is being removed (the account must
already exist) admindomain_ID is the home Admin Domain, and admindomain_ID_list is the Admin
Domain list to be removed from the existing list. If the –h argument is not specified, the home Admin
Domain will either remain as it was or will be the lowest Admin Domain ID in the remaining list.
Specifies the account for which parameters are being changed.
Changes the role to one of the names listed in
page 56. In secure mode, role can also be changed to
nonfcsadmin role. An account cannot change its own role.
Account with Admin role can change the role names of all
user-defined accounts except those with Admin roles.
Optional: Changes the home Administrative Domain; if no
Administrative Domain is specified, then the lowest numbered
Administrative Domain in the list is assigned.
Optional: Changes which Administrative Domains the user may
access; if no Administrative Domains are listed, the user is
automatically assigned to AD0. Use comma-separated lists,
ranges, or both for example -a 0,9,10- 1 5,244.
Optional: Changes the description to the account. The
description field can be up to 40 printable ASCII characters
long. The following characters are not allowed: asterisk (*),
single quotation mark ('), quotation mark ("), exclamation point
(!), semicolon (;), and colon (:).
Optional: Enables or disables the account. Enter yes to enable
the account or no to disable it. If you disable an account, all
active CLI sessions for that account are logged out. You can
enable or disable user-defined or default accounts.
Unlocks the user account.
Specifies an expired password that must be changed the first
time the user logs in.
[-h <admindomain_ID>] [-a <admindomain_ID_list>]
Table 8 on
Fabric OS 6.x administrator guide 61