HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 60

To create an account:
Connect to the switch and log in using an admin account.
1.
2. Enter the following command:
userConfig --add <username> -r <rolename> [-h <admindomain_ID>]
[-a <admindomain_ID_list>] [-d <description>] [-x]
username
-r rolename
-h admindomain_ID
-a admindomain_ID_list Optional: Specifies which Administrative Domains the user may
-d description
-x
3. In response to the prompt, enter a password for the account.
The password is not displayed when you enter it on the command line.
To delete an account:
1. Connect to the switch and log in using an admin account.
2. Enter the following command:
userConfig --delete username
where username specifies the account name
You cannot delete the default accounts. An account cannot delete itself. All active CLI sessions for the
deleted account are logged out.
At the prompt for confirmation, enter y.
3.
60 Managing user accounts
Specifies the account name, which must begin with an alphabetic
character. The name can be from 8 to 40 characters long. It is
case-sensitive and can contain alphabetic and numeric
characters, the period (.) and the underscore ( _ ). It must be
different than all other account names on the logical switch. The
account name cannot be the same as a role name.
Specifies the role: User, SwitchAdmin, ZoneAdmin, FabricAdmin,
BasicSwitchAdmin, Operator, or Admin in nonsecure mode; in
secure mode you can also use NonfcsAdmin.
Optional: Specifies the home Administrative Domain; if no
Administrative Domain is specified, then the lowest numbered
Administrative Domain in the list is assigned.
access; if no Administrative Domains are listed, the user is
automatically assigned to AD0. Use comma-separated lists,
ranges, or both for example -a 0,9,10- 1 5,244.
Optional: Adds a description to the account. The description field
can be up to 40 printable ASCII characters long. The following
characters are not allowed: asterisk (*), single quotation mark ('),
quotation mark ("), exclamation point (!), semicolon (;), and
colon (:).
Specifies an expired password that must be changed the first time
the user logs in.