HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 299

4. Respond to the prompts as follows:
Enter the name or IP address of the server where the file is to be stored; for
Host Name
example,
Enter the user name of your account on the server; for example, "JohnDoe".
User name
Enter your account password for the server.
Password
Specify a path name for the remote directory. Absolute path names can be
Remote
specified by starting the path name with a forward slash (/). Specifying a
directory
relative path name will create the directory in the user's home directory on
UNIX servers, and in the directory where the FTP server is running on
Windows servers.
To enable the automatic transfer of trace dumps:
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> supportftp -e
Support auto file transfer enabled.
To set up periodic checking of the remote server:
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> supportftp -t interval
Specify the interval in hours, for example:
switch:admin> supportftp -t 4
supportftp: ftp check period changed
The minimum interval is 1 hour. Specify 0 hours to disable the checking feature.
To save a comprehensive set of diagnostic files to the server:
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> supportsave -c
The command is interactive.
3. Respond to the prompts as follows:
Enter the user name of your account on the server; for example, "JohnDoe".
User name
Enter your account password for the server.
Password
Specify a path name for the remote directory. Absolute path names can be
Remote
specified by starting the path name with a forward slash (/). Specifying a
directory
relative path name will create the directory in the user's home directory on
UNIX servers, and in the directory where the FTP server is running on
Windows servers.
1080::8:800:200C:417A
for a server configured for IPv6.
Fabric OS 6.x administrator guide 299