Range Of Output Ports - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

The portCfgExport command has additional options to verify the front domain ID. The
portCfgExport –d option is changed to enforce use of the same front domain ID for the EX_Ports
connected to the same edge fabric. The portCfgExport display results remain the same.
For more information about the portCfgExport -d option, see
and the command details in the Fabric OS Command Reference.
The following example illustrates the use of the portcfgexport command.
switch:admin_06> portcfgexport 2/0
Port 2/0 info
Admin: enabled
State: OK
Pid format: core(N)
Operate mode: Brocade Native
Edge Fabric ID: 16
Front Domain ID: 160
Front WWN: 50:06:06:9e:20:9f:ce:10
Principal Switch: 7
principal WWN: 10:00:00:60:69:c0:05:8a
Fabric Parameters: Auto Negotiate
R_A_TOV: 9000(N)
E_D_TOV: 2000(N)
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
The fabricShow command shows only one front domain per router connection. In the following example
displayed below is from an edge fabric and shows that fcr_fd_3_32 has two EX_Port connections, but
one front domain ID.
switch:admin_06> fabricshow
Switch ID
-------------------------------------------------------------------------
1: fffc01
2: fffc02
3: fffc03
199: fffcc7 10:00:00:60:69:c0:05:d1 10.32.156.33
>"mojo__10" The Fabric has 4 switches
For more information about the fabricShow command, see the Fabric OS Command Reference.

Range of output ports

The edge fabric detects only one front domain from an FC router connected through multiple output ports.
The output port of the front domain is not fixed to 0; the values can be in a range of 129–255. The range
of the output ports connected to the xlate domain is also 129–255. This range enables the front domain to
connect to 127 remote xlate domains.
Worldwide NameEnet IP Addr
50:00:51:e3:70:d2:5f:cb
50:00:51:e3:70:d2:5f:cc
50:00:51:e3:60:14:0e:20
"portCfgExport
FC IP Addr
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0
Fabric OS 6.x administrator guide 243
options" on page 223
Name
"fcr_xd_1_32"
"fcr_xd_2_1"
"fcr_fd_3_32"