HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 290

To display the port statistics:
Connect to the switch and log in as admin.
1.
2. At the command line, enter the portStatsShow command.
Port statistics include information such as the number of frames received, number of frames sent, number of
encoding errors received, and number of class 2 and class 3 frames received.
See the Fabric OS Command Reference for additional portStatsShow command information, such as
the syntax for slot or port numbering.
switch:admin> portstatsshow 3/7
stat_wtx
stat_wrx
stat_ftx
stat_frx
stat_c2_frx
stat_c3_frx
stat_lc_rx
stat_mc_rx
stat_mc_to
stat_mc_tx
tim_rdy_pri
tim_txcrd_z
er_enc_in
er_crc
er_trunc
er_toolong
er_bad_eof
er_enc_out
er_bad_os
er_c3_timeout
er_c3_dest_unreach
destination unreachable
er_other_discard
er_crc_good_eof
er_inv_arb
open
transfer
opened
starve_stop
fl_tenancy
nl_tenancy
zero_tenancy
switch:admin>
290 Working with Diagnostic Features
0 4-byte words transmitted
0 4-byte words received
0 Frames transmitted
0 Frames received
0 Class 2 frames received
0 Class 3 frames received
0 Link control frames received
0 Multicast frames received
0 Multicast timeouts
0 Multicast frames transmitted
0 Time R_RDY high priority
0 Time BB credit zero
0 Encoding errors inside of frames
0 Frames with CRC errors
0 Frames shorter than minimum
0 Frames longer than maximum
0 Frames with bad end-of-frame
0 Encoding error outside of frames
0 Invalid ordered set
0 Class 3 frames discarded due to timeout
0 Class 3 frames discarded due to
0 Other discards
0 Crc error with good eof
0 Invalid ARB
0 loop_open
0 loop_transfer
0 FL_Port opened
0 tenancies stopped due to starvation
0 number of times FL has the tenancy
0 number of times NL has the tenancy
0 zero tenancy