Supported Connectivity For Fabric 6.0; Feature Support And Interoperability; Typical Configuration; Complete Feature Compatibility Matrix - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Supported Connectivity for Fabric 6.0

Brocade switches can directly connect to the following Brocade M-series (formerly McDATA) directors:
Mi10k, M6140, M6064 and switches: 4700, 4400, 4500, 4300, 3232,3216, 3032, 3016.
Other M-EOS 9.6.2 products can reside in the same fabric as a Brocade switch but cannot directly connect
to it. M-EOS 9.6.2 must be running on all Fibre Channel switches in the fabric.
The Multi protocol Router, and the Brocade FR4- 1 8i blade can connect to a Brocade switch for routing
between fabrics.
HP StorageWorks blade server SAN switch modules and switches can connect to the fabric using the
Access Gateway feature.
HP DC Director
Figure 46

Typical configuration

Feature support and interoperability

Table 106 is a comprehensive matrix of feature support. Some features are discussed in detail in later
sections.
Table 106

Complete feature compatibility matrix

Feature
Access Control
Admin Domains
Advanced Performance
Monitoring
Audit
Beaconing
HP DC Director
HP DC Director
Support
• ACL in strict mode: No
• ACL in tolerant mode: Yes
• ACL in absent mode: Yes
No
No
Yes
Yes
HP DC Director
Notes
Works in conjunctions with
SANtegrity.
Fabric OS 6.x administrator guide 479
26413a