HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 474

Hp storageworks fabric os 6.x administrator guide (5697-0015, may 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

14.
Change to /dev and untar the file that was tared in step 4. For example:
tar –xf /tmp/jbod.tar
15.
Import the volume groups using vgimport. The proper usage would be
vgimport –m <mapfile> <path_to_volume_group> <physical_volume_path>. For
example:
vgimport –m /tmp/jbod_map /dev/jbod /dev/dsk/c64t8d0 /dev/dsk/c64t9d0
16.
Activate the volume groups using vgchange. The proper usage would be vgchange –a y
<path_to_volume_group>. For example:
vgexport –a y /dev/jbod
17.
If you are not using multipathing software, mount all devices again and restart I/O. For example:
mount /mnt/jbod
18.
If you are using multipathing software, reenable the affected path. The preceding steps do not "clean
up" the results from ioscan. When viewing the output of ioscan, notice the that the original entry is still
there, but now has a status of NO_HW.
# ioscan -funC disk
Class
I
---------------------------------------------------------------------------
disk
0
0/0/1/1.2.0
disk
1
disk
319 0/4/0/0.1.2.255.14.8.0 adisk CLAIMED DEVICE
ST336605FC
disk
320 0/4/0/0.1.18.255.14.8.0adisk NO_HW DEVICE
ST336605FC
19.
Remove the original (outdated) entry. The proper usage for this command is rmsf –a –v
<path_to_device>. For example:
rmsf –a –v /dev/dsk/c65t8d0
20.Enter the ioscan -funC disk command to validate that the entry has been removed. In this
example, the NO_HW entry is no longer listed:
het46 (HP-50001)> ioscan -funC disk
Class
I
---------------------------------------------------------------------------
disk
0
disk
1
disk
319 0/4/0/0.1.2.255.14.8.0 adisk CLAIMED DEVICE
ST336605FC
21.Repeat for all fabrics.
22.Issue the switchEnable command. Enable the core switches first, then the edges.
474 Configuring the PID format
H/W Path
0/0/2/1.2.0
H/W Path
0/0/1/1.2.0
0/0/2/1.2.0
Driver S/W State H/W Type Description
adisk CLAIMED
DEVICE
/dev/dsk/clt2d0 /dev/rdsk/c1t2d0
adisk CLAIMED
DEVICE
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
/dev/dsk/c64t8d0 /dev/rdsk/c64t8d0
/dev/dsk/c65t8d0 /dev/rdsk/c65t8d0
Driver S/W State H/W Type
adisk CLAIMED
DEVICE
/dev/dsk/clt2d0 /dev/rdsk/c1t2d0
adisk CLAIMED
DEVICE
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
/dev/dsk/c64t8d0 /dev/rdsk/c64t8d0
SEAGATE ST39204LC
HP DVD-ROM 304
SEAGATE
SEAGATE
Description
SEAGATE ST39204LC
HP
DVD-ROM 304
SEAGATE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae370a - brocade 4gb san switch 4/12

Table of Contents