Configuring Ftrace; Verifying The Fcip Tunnel Configuration - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Configuring FTRACE

FTRACE is a support tool primarily for use by Tech Support personnel. FTRACE includes the ability to freeze
traces on certain events, and to retain the trace information for future examination. The syntax for the
portcfg ftrace command is as follows:
portcfg ftrace [slot/]ge0|ge1 tunnel_Id cfg [-a 1|0] [-b value] [-e 1|0] [-i
value] [-p value] [-r value] [-s value] [-t value] [-z value]
Where:
slot
ge0|ge1
tunnelid
cfg
-a 1|0
-b value
-e 1|0
-i value
-p value
-r value
-s value
-t value
-z value
The following example configures FTRACE with ACO disabled, and FTRACE enabled with a trigger mask
value of 00000003, and a trace mask value of ffffffff.
portcfg ftrace ge0 3 cfg -a 0 -e 1 -p 5 -s 00000003 -t ffffffff

Verifying the FCIP tunnel configuration

After you have created local and remote FCIP configurations, it is recommended that you verify that the
tunnel configuration operation succeeded using the portShow fcipTunnel command (be sure to
specify the slot/port numbers and number of tunnels). The command syntax is as follows:
portshow fciptunnel [slot/][ge0|ge1 all|tunnel_id
Where:
all
tunnel_id
The number of a slot in a 4/256 SAN Director or DC Director chassis
that contains an FR4- 1 8i blade. This parameter does not apply to the
stand-alone 400 Multi-protocol Router.
The Ethernet port used by the tunnel (ge0 or Ge1).
The tunnel number (0 - 7).
Creates an FTRACE configuration.
Enables or disables ACO.
Number of buffers (range 0 to 8).
Enable or disable FTRACE.
Display mask value (range 0 to FFFFFFFF).
Default is FFFFFFFF.
Post trigger percentage value (range 0- 1 00). Default is 5.
Number of records (range 0 through 1,677,721). Default us 200000.
Trigger mask value (range 00000000 to FFFFFFFF). Default is
00000003.
Trace mask value (range 00000000 to FFFFFFFF). Default is
80000C7B.
Trace record size (range 80 to 240). Default is 80.
Displays all FCIP tunnels.
Displays the specified FCIP tunnel.
Fabric OS 6.x administrator guide 437