Removing An Interface Card - Epson AcuLaser M4000N User Manual

3. Slide and push the interface card into the slot firmly, then fasten the screw as shown below.
4. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See "Printing a Status Sheet"
on page 155.

Removing an interface card

Caution:
c
Before you remove an interface card, be sure to discharge any static electricity by touching a grounded
piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.
AcuLaser M4000 Series
Installing Options
User's Guide
120