Control Panel - Epson AcuLaser M4000N User Manual

Control panel

a. LCD panel
b. Cancel Job button
c. Data light (Green)
d. Ready light (Green)
e. Start/Stop button
f. Error light (Orange)
g. Enter button
h. Down button
i. Back button
j. OK button
k. Up button
Displays printer status messages and control panel menu settings.
Press once to cancel the current print job. Press and hold for more
than two seconds to delete all jobs from the printer memory.
On when print data is stored in the print buffer (the section of
printer memory reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
On when the printer is ready, indicating that the printer is ready to
receive and print data.
Off when the printer is not ready.
When the printer is printing, pressing this button stops the
printing.
When the error light is flashing, pressing this button clears the
error and switches the printer to ready status.
On or flashes when an error has occurred.
Use these buttons to access the control panel menus, where you
can make printer settings and check the status of consumable
products. For instructions on how to use these buttons, see "Using
the Control Panel Menus" on page 53.
AcuLaser M4000 Series
Getting to Know Your Printer
User's Guide
23