Epson AcuLaser M4000N User Manual page 16

❏ Use the type of power source indicated on the label. If you are not sure of the type of power
available, consult your dealer or local power company.
❏ When connecting this product to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
❏ If you use an extension cord, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
❏ Unplug this printer from the wall outlet and refer servicing to a qualified service representative
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
E. If it has been dropped or the cabinet has been damaged.
F. If it exhibits a distinct change in performance, indicating a need for service.
When using the printer
❏ The printer weighs about 24 kg (52.9 lb). One person should not attempt to lift or carry the
printer. Two people should carry it.
❏ Follow all warnings and instructions marked on the printer.
❏ Unplug this printer from the wall outlet before cleaning.
❏ Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.
❏ Do not use printer in a damp environment.
❏ Never push objects of any kind through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electric shock.
❏ Never spill liquid of any kind on the printer.
❏ Except as specifically explained in the printer's documentation, do not attempt to service this
product yourself.
AcuLaser M4000 Series
Safety Instructions
User's Guide
16