Epson AcuLaser M4000N User Manual page 46

Printing an overlaid document
You can select the registered form data from the Paper Source drop-down list on the Basic Settings
tab. For registering form data in the Paper Source, see step 8 in "Creating an overlay" on page 44.
If overlay form data is not registered in the Paper Source or if you want to make detailed settings,
follow the steps below.
1. Open the file to print with overlay data.
2. From the application, access the printer driver. For details, see "Accessing the printer driver"
on page 172.
3. Click the Advanced Layout tab.
4. Select the Form Overlay check box.
5. Select the Overlay Print check box, then click More Settings. The Form Selection dialog box
appears.
6. Make appropriate settings. For details about each setting, see online help.
Note:
If you cannot select the form from the application, access the printer driver from the operating system.
For details, see "Accessing the printer driver" on page 172.
7. Click OK in the Form Selection dialog box.
8. Click OK in the Advanced Layout tab.
9. Click OK (For Windows 2000, click Print).
Saving an overlaid form pre-settings
This function allows you to save the settings you made from "Creating an overlay" on page 44.
1. From the Form Selection dialog box, click Save/Delete. To open the dialog box, see "Printing
an overlaid document" on page 46.
2. Type the pre-settings name in the Form Pre-Settings Name box, then click Save. Your
pre-settings name will appear in the Form Pre-Settings drop-down list in the Form Selection
dialog box.
3. Click OK. Your pre-settings name will appear in the Pre-Settings drop-down list in the
Advanced Layout dialog box.
AcuLaser M4000 Series
Printing Tasks
User's Guide
46