Epson AcuLaser M4000N User Manual page 62

AcuLaser M4000 Series User's Guide
Time to Sleep
Specifies the length of time until the printer enters the sleep mode if there are no button operations.
Time Out
Specifies the length of the time, in seconds, before a time out when interfaces are being switched
automatically. The time before a time out occurs is the length of time from the point when no data
is being received from an interface until the point of switching the interface. If the printer has a
print job when switching the interface, the printer prints the print job.
Paper Source
Specifies whether paper feeds into the printer from the MP tray, the standard paper cassette, or the
optional paper cassette unit.
If you select Auto, paper feeds from the paper source containing paper that matches your Paper
Size setting.
If an envelope size (C5) is selected as the Page Size setting, paper always feeds from the MP tray.
Out Bin
Specifies the output tray when the optional Stacker is installed.
Stacker
Specifies whether or not to output the paper to the face-down tray when the Stacker is full.
MP Mode
This setting determines whether the MP tray has the highest or lowest priority when Auto is
selected as the Paper Source setting in the printer driver. When Normal is selected as the MP Mode,
the MP tray has the highest priority as the paper source. If you select Last, the MP tray has the
lowest priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Using the Control Panel 62