Epson AcuLaser M4000N User Manual page 100

AcuLaser M4000 Series User's Guide
3. Install the Duplex Unit as shown below. Make sure that the unit hooks onto the printer's tabs
and the duplex connector goes into the slot.
4. Secure the unit with the two screws.
5. Reconnect the interface cable and power cord, then turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See "Printing a Status Sheet"
on page 155.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See
"Making Optional Settings" on page 173.
Installing Options 100