Thick Paper - Epson AcuLaser M4000N User Manual

❏ When printed envelopes are wrinkled, open cover B and push up the form feed pressure change levers at
both sides of the fuser unit until they are in the vertical position. It may reduce the wrinkles in the
envelopes. When using paper other than envelopes, be sure to push the levers back down.
Warnings
w
Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked
CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the
fuser and the surrounding areas may be very hot. If you must touch one of these areas, wait 30
minutes to allow the heat to subside before doing so.

Thick paper

Available paper source:
❏ MP tray
❏ Standard lower cassette
❏ Optional lower cassette
Printer driver settings:
Paper Size:
Paper Source:
Paper Type:
A4, A5, B5, LT, HLT, EXE, LGL, GLG, GLT, F4
MP Tray, Cassette 1, Cassette 2, Cassette 3
Thick (for 106 to 159 g/m² paper) or Extra Thick (for 160 to 216 g/m² paper)
AcuLaser M4000 Series
Printing Tasks
User's Guide
33