Epson AcuLaser M4000N User Manual page 85

AcuLaser M4000 Series User's Guide
Maintenance unit Needed Soon
This message indicates that the maintenance unit is near the end of its service life. You can continue
to print until the Replace Maintenance Unit message appears. Prepare a new maintenance unit.
To clear this warning message and continue printing, select Clear All Warnings from the control
panel's Reset Menu. For instruction about accessing the control panel menus, see "How to access
the control panel menus" on page 53.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size indicated by
ssss is loaded, then press the Start/Stop button.
Memory Overflow
The printer has insufficient memory to execute the current task. Press the Start/Stop button on the
control panel to resume printing, or press the + Cancel Job button to cancel the print job.
Need Memory
The printer has insufficient memory to complete the current print job.
To clear this error message, select Clear Warning from the control panel's Reset Menu. See"How
to access the control panel menus" on page 53 for instructions.
To prevent this problem from recurring, add more memory to your printer as described in
"Memory modules" on page 205, or reduce the resolution of the image to be printed.
NonGenuine Toner Cartridge
The installed imaging cartridge is not a genuine Epson product. Installing a genuine imaging
cartridge is recommended. The printout and remaining service life of the imaging cartridge
displayed on the control panel may be different from those when using genuine EPSON imaging
cartridge. Epson shall not be liable for any damages or problems arising from the use of
consumable products not manufactured or approved by Epson.
Install a genuine Epson product, or Clear All Warnings of the Reset Menu on the control panel to
clear the warning message. See "Imaging Cartridge" on page 122 for instructions on replacing the
imaging cartridge.
Offline
The printer is not ready to print. Press the Start/Stop button.
Using the Control Panel 85