Removing An Interface Card; Compactflash Memory; Installing A Compactflash Memory - Epson AcuLaser C9300N User Manual

3. Slide and push the interface card into the slot firmly, then fasten the screw as shown below.
4. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See "Printing a Configuration
Status Sheet" on page 154.

Removing an interface card

Caution:
c
Before you remove an interface card, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.

CompactFlash Memory

Installing a CompactFlash memory

An optional CompactFlash memory enables you to store overlay forms, use Reserve Job function, and
improve the collate printing environment.
Warning:
w
Be careful when working inside the printer as some components are sharp and may cause injury.
Caution:
c
Before you install a CompactFlash memory, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Epson AcuLaser C9300 Series
Installing Options
User's Guide
129