Epson AcuLaser C3900N Reference Manual page 98

Item
Auto Continue
Hold Job Timeout
Energy Saver Time
Grayscale Page
Description
Selects whether or not printing continues if the size or type of paper in the
selected paper tray is different from the size or type of paper for the print job.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
SYS DEFAULT MENU - AUTO CONTINUE
Specifies the length of time until print jobs saved on the hard disk are deleted. If
Disable is selected, print jobs are not deleted at a specific time.
Choices: Disabled, One Hour, Four Hours, One Day, One Week
Default: Disabled
Configuration Menu Equivalent:
SYS DEFAULT MENU - HOLD JOB TIMEOUT
Note:
This menu item appears only if an optional hard disk drive is installed.
Specifies the length of time until the machine enters Energy Saver mode.
Choices: 5-15 Minutes, 30 Minutes, 1 Hour, 3 Hours
Default: 15 Minutes
Configuration Menu Equivalent:
SYS DEFAULT MENU - ENERGY SAVER TIME
Specify the operation to be performed for black-and-white pages in a job
specified for color printing.
If Auto is selected, the printer determines whether the data is color or
black-and-white before printing it.
If Grayscale Print is selected, black-and-white printing is automatically
performed depending on each page. It may decrease the printing speed in some
cases, but it reduces the consumption of the color toner cartridges and
photoconductor unit.
If Color Print is selected, color printing is performed, even for a black-and-white
page.
Choices: Auto, Grayscale Print, Color Print
Default: Auto
Configuration Menu Equivalent:
SYS DEFAULT MENU - GRAYSCALE PAGE
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 98