Default
IP ADDRESS
Purpose
Range
Default
SUBNET MASK
Purpose
Range
Default
DEFAULT GATEWAY
Purpose
Range
Default
DHCP
Purpose
Options
Default
YES
Sets the IP address of this printer on the network.
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to
move between triplets.
000.000.000.000
Sets the subnet mask value of the network. The subnet mask allows you to limit access to your
printer (for example, according to departmental divisions).
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to
move between triplets.
255.255.000.000
Sets the address of the router/gateway if a router/gateway is used on your network and you
allow users outside your network environment to print on your printer.
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to
move between triplets.
000.000.000.000
If there is a DHCP server on the network, specifies whether the IP address and other network
information is automatically assigned by the DHCP server.
ON
OFF
ON
AcuLaser C3900
Understanding the Ethernet Configuration Menus
Reference Guide
42