Epson AcuLaser C3900N Reference Manual page 43

BOOTP
Purpose
Options
Default
ARP/PING
Purpose
Options
Default
HTTP – ENABLE
Purpose
Options
Default
FTP – ENABLE
Purpose
Options
Default
TELNET
Purpose
Options
Default
If there is a BOOTP server on the network, specifies whether the IP address and other network
information is automatically assigned by the BOOTP server.
ON
OFF
OFF
Select whether or not the IP address is automatically acquired.
ON
OFF
OFF
Select whether or not to enable HTTP.
YES
NO
YES
Select whether or not to enable FTP.
YES
NO
NO
Select whether to enable or disable Telnet transmissions.
ENABLE
DISABLE
DISABLE
AcuLaser C3900
Understanding the Ethernet Configuration Menus
Reference Guide
43