Epson AcuLaser C3900N Reference Manual page 139

Item
SNMP v1/ Read Community
v2c(IP) Name
Write
Write Community
Name
SNMP v3 Context Name
Discovery
Discovery User
Name
Read User Name
Description
Specifies the community name to be used for scanning.
Range: 1 to 15 characters
Default: public
If Enable is selected, Write is enabled.
Choices: Enable, Disable
Default: Enable
Specifies the community name to be used for reading and writing.
Range: 1 to 15 characters
Default: private
Specifies the context name.
Range: Up to 63 characters
If Enable is selected, Discovery is enabled.
Choices: Enable, Disable
Default: Enable
Specifies the user name for detection.
Range: 1 to 32 characters
Default: public
Specifies the name of read only user.
Range: Up to 32 characters
Default: initial
Note:
The same name specified as the Discovery user name cannot be used.
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
139