Item
Clear button
Cancel button
IPsec (IKE Settings)
Item
No.
Encryption Algorithm
Authentication
Algorithm
Apply button
Clear button
Cancel button
IPsec (IPsec SA Settings)
Item
No.
Security Protocol
Encryption Algorithm for
ESP
Authentication
Algorithm for ESP
Description
Resets all configuration settings to previous values.
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Description
Displays the number (No.) to be registered.
Select the encryption algorithm to be used when creating a control tunnel.
Choices: DES-CBC, 3DES-CBC
Default: DES-CBC
Select the authentication algorithm to be used when creating a control tunnel.
Choices: MD5, SHA-1
Default: MD5
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Description
Displays the number (No.) to be registered.
Select the security protocol.
Choices: AH, ESP, ESP & AH
Default: AH
When ESP is selected for Security Protocol, specify the ESP encryption algorithm.
Choices: None, DES-CBC, 3DES-CBC, AES-CBC, AES-CTR
Default: None
When ESP is selected for Security Protocol, specify the ESP authentication algorithm.
Choices: None, MD5, SHA-1
Default: None
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
129