Remove a Certificate
Note:
This menu item appears if a certificate is installed.
Item
OK button
Back button
Cancel button
Mode Using SSL/TLS
Note:
This menu item appears if a certificate is installed.
Item
Mode Using SSL/TLS
Apply button
Clear button
Back button
Cancel button
Authentication
User Authentication
Note:
❏ This page appears only if an optional hard disk drive is installed.
❏ When User Authentication or Account Track is set to On and Public Access is set to Restrict on
this page, printing is not possible except from a host where authentication settings can be specified
(Windows printer driver). In addition, resources (fonts, color profiles and form overlays) can no
longer be downloaded and firmware can no longer be updated.
Description
Click to display a confirmation message. Click OK in the confirmation message to
delete the certificate.
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Description
Selects the SSL transmission mode.
Choice: Disable, Enable
Default: Disable
Click to apply the setting specified beside "Mode Using SSL/TLS".
Resets all configuration settings to previous values.
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
AcuLaser C3900
Using Web-Based EpsonNet Config
Reference Guide
147